1 / 5
Knopf / Kordel für Mäntel und Jacken — zdjęcie 1
1 / 5

Knopf / Kordel für Mäntel und Jacken

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4-teiliger Knopf für Mäntel und Jacken

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

[Update 28.02.2024: Optimierte Version veröffentlicht, feinere Strukturen, Kappen leicht abgerundet]

 

Originaltext:

Im Grunde haben mich unsere Kater dazu gezwungen, dass ich mir eine selbstgemachte Lösung einfallen lassen musste. Sie knabbern gerne an unseren Knöpfen an den Mänteln, da jene aus Holz sind. Entsprechend kaputt sehen diese dann nun auch aus. 

Dem Modell sieht man mit Sicherheit an, dass es aus der Not heraus entstanden ist und hier und da auch noch optimiert werden muss. Die Montage ist recht simpel: Entfernt die alten Knöpfe, legt einen Teil der beiden Längshälften unter das Knopfband und den anderen darauf. Dann setzt ihr eine der Kappen zur Hälfte auf eine der beiden Seiten. In die andere Kappe gebt ihr einen Tropfen Klebstoff (hier halten die meisten der Knöpfe auch ohne - mit Kleber ist aber auf Nummer sicher) und setzt diesen dann fest auf die andere Seite auf. Anschließend wiederholt ihr das Kleben auch mit der anderen Kappe. Das war es dann auch schon. 

 

________

[Update 28.02.2024: Optimized version released, finer structures, caps slightly rounded]

 

Original text:

Basically, our cats forced me to come up with a homemade solution. They like to nibble at the buttons on our coats because they are made of wood. As a result, they now look correspondingly broken.

You can definitely tell that the model was created out of necessity and still needs to be optimized here and there. The assembly is quite simple: remove the old buttons, place one part of the two long halves under the button band and the other on top. Then place half of one of the caps on one of the two sides. Put a drop of glue in the other cap (most of the buttons will hold without glue - but you are on the safe side with glue) and then place it firmly on the other side. Then repeat the gluing process with the other cap. That's all there is to it.

Tagi