Minimalist Weighted Polaroid Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polaroid photo or postcard holder designed for support-free printing which resists blowing away or getting knocked over.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This model was designed to hold polaroid photos securely such as in an outdoor setting. There is a slot to hold 6 3/8-16 sandard UNC nuts with a little clip to retain them. Bending this clip upwards in the middle makes inserting it a breeze. An access slot on the bottom allows masking/scotch tape to be applied to the photo firmly affixing it in place. Strong enough to lift the photo without the stand falling off!
No supports required to print and perfect for batch printing, recommend .3mm layer height. Weights are optional based on use, PETG is recommended for retention clip to allow bending. This model was printed in Prusament Galaxy Black PLA and Signal White PETG.