Soporte para Rotulador Pizarra / Whiteboard Marker Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soporte para Rotuladores de Pizarra para atornillarlo al marco de Madera o en la propia pared.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 299
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Se trata de un soporte para rotuladores las medidas son para rotuladores de diámetro inferior a 24 mm.
Se atornilla a al marco de Madera de la pizarra con 2 tornillos y queda Fijo.
Mi recomendación para la impresión es hacerlo con la cara inferior e imprimirlo en vertical, los agujeros se mantienen abiertos sin soportes necesarios.
________________________________________________________________________
This is a holder for markers. The measurements are for markers with a diameter less than 24 mm.
It is screwed to the wooden frame of the blackboard with 2 screws and remains fixed.
My recommendation for printing is to do it with the bottom side and print it vertically, the holes remain open without necessary supports.