1 / 3
Veto goal net clips (portable and in-ground) — zdjęcie 1
1 / 3

Veto goal net clips (portable and in-ground)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Goal net clips to suit the Veto sports portable aluminium goals and in-ground aluminium goals

Ocena
0 / 5
Polubienia
4
Pobrania
80
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Goal net clips to suit the Veto sports portable aluminium goals (all sizes) and in-ground aluminium goals.

I printed these in ASA on a PEI sheet using the standard PrusaSlicer settings (2 perimeters, 15% rectilinear infill) and they work great. No brim/glue etc was necessary when printing on the PEI sheet. Definitely wouldn't recommend using the PC sheet as ASA does not bond well to it. You could also use Polycarbonate but it's more expensive. PETG would be another alternative but they won't last as well in the sun.

ASA was chosen due to it's UV resistant properties given they are going to be outdoors in the sun. Just be aware of the fumes printing with ASA puts off. An air filtration system is highly recommended!

They are made to be a tight fit for both goal types so I also made an install/removal tool by cutting some slots in a 4-way PVC pipe fitting (~ 25mm OD to fit on the portable goal version).

I printed them in batches of 42 for the portable goal version and 40 for the in-ground version. You could probably fit more on the sheet but that filled them up pretty well. A 1KG roll made ~ 400-450 clips. Each full sized goal needs ~ 60-70 clips

Tagi