1 / 1
PTFE Cutter for Dragon-ST hot-end and Bear Extruder — zdjęcie 1

PTFE Cutter for Dragon-ST hot-end and Bear Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jig to allow chamfering and cutting the PTFE tube necessary to use the Phaetus Dragon hot-end with the Bear Extruder.

Ocena
5 / 5
Polubienia
25
Pobrania
178
Wydruki
7
Wyświetlenia
1417
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

On my Prusa MK3, I use the excellent Bear Extruder and X-Axis (see link below). This project comes with a nice jig you can use to chamfer and cut the PTFE tube. However, the PTFE tube when using the standard E3D-V6 hotend is a different length (50mm) then when using the Phaetus Dragon hotend (35mm). I have modified the Bear PTFE cutter for this different length.

Find more info on the Bear Extruder and X-Axis here:

https://github.com/gregsaun/bear_extruder_and_x_axis

Tagi