Nozzle Cleaning and Removal Tool--Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATED. Remix changed both the inner and outer diameter of the original tool it was based on.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 139
- Wydruki
- 7
- Wyświetlenia
- 1179
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This knob holds a 7mm socket for removing and installing printer nozzles.
UPDATED to version 2, added four files, original version is still available. Please let me know if they don't print correctly.
-There should now be a large chamfer on the bottom of the knob to allow easier alignment of the nozzle cleaning pin.
-Available for 2 different socket diameters.
Normal version accepts a socket with 11.5 mm nominal diameter
Large accepts a socket with a 13.5 mm nominal diameter
-Short versions for both 11.5mm and 13.5mm are available. These knobs are 3mm shorter allowing the nozzle pin to be inserted further into the nozzle for cleaning
I really liked the idea of the original tool but I found the outer diameter too small for me to use and the inner diameter too large for the socket I had. Using OpenSCAD, I redesigned the tool, making it larger and added knurling (from https://www.thingiverse.com/thing:32122). Outer diameter is 29mm with a 1mm hole for the nozzle clearing needle. A Craftsman brand 7mm socket fits nice and snug.
Print with PET or ABS. I used 0.2mm with 30% infill.
Permissions left the same as the original tool.