Crosshair laser adapter drill press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to upgrade my old drill press with a crosshair LED Laser module. The Thing is made from 2 parts: the LED modul
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
the parts are printed in PETg fine for enough toughness to open the clamp around the 46mm drill press upright column.
use M5 for the LED clamp, M3 for the Module clamps and the battery contact points.
the switch is a 8mmx13mm single tumble switch.
the 2 LED line lasers are from AliExpres, 3-5V, 5 mW, 12 x 35mm
the battery Holder is a remix from various available 18650 Battery Holders. I added the switch compartment, the lid, 2 positions to fix it with tie wraps and I improved the sliding piece for better printing in place. So in the end obly the spring was original afterwards.