1 / 2
Pelican inspired tough case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable tough case with customizable insert.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 117
- Wydruki
- 1
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (33)Powiązane
Printable tough case inspired by Pelican case. Inside measurements 82x85x205mm. Made to fit Vallejo airbrush paint bottles ø25mm, but there is a blank insert you can customize for your needs.
Prnint the main case in your preferred material, PLA works fine.
Use PLA for the latshes to keep them snappy, using PETG was for me a bit too flexible.
Print the seal in TPU.
Additional hardware needed:
- x6 M3x30 screws