CZ 2075 Rami Mag Sleeve - 14 & 16 rd
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mag Sleeve for 75 mags in a Rami
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted some additional range magazines for my Rami. I knew that the CZ 75 magazines fit in the Rami magwell, but I couldn't find any appropriately sized mag sleeves. Technically you can use them without a sleeve, but you risk bending the ejector pin from over-inserting if you slam in in too hard. So, I just copied the OEM spacer that comes on the 14 rd Rami mags. I found 16 rd Mec-Gar mags at Lanbos for under $18 each, vs Rami 14 rd mags around $50 each. So here we are. I created a 14 rd sleeve and a 16 rd mag sleeve. I have test fit them with the 16 rd Mec-Gar mags with the steel base plate as shown in the pics. Including STEP files in case anyone needs to adjust for other mags.