ESMAG - Magazines Holder - Tippmann M4-22
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Holder for Tippmann M4-22 Magazines
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories.
Strong magnets keep the holders securely in place through the fabric lining.
Over time, I plan to expand the collection with holders for additional equipment.
For more designs, check the ESMAG - Weapon & Magazines Holders collection.
If you like my work you can support me and Buy Me A Coffee ;)
Part Description
The following holders are available:
Holder for 1 Tippmann M4-22 magazine
Holder for 2 Tippmann M4-22 magazines
Suggested Print Settings
Material: PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +20%
Infill pattern: Gyroid
Assembling
To assemble the 1-magazine holder, the following parts are required:
1x M5x10 countersunk screw (DIN7991M5x10-10.9)
For the 2-magazine holder, an additional set of the parts listed above is required.
Changelog
2024-02-28 - Initial release with .step and .stl files
2026-10-05 - Rename to ESMAG - Weapon & Magazines Holders