Subaru STi short intake for SD - GD Chassis+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rough re-imagine of an intake w/out MAF sensor for running Speed Density. Uses Cobb or similar intake filter.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 834
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This was a quick way to remove the obstruction of the MAF sensor for when you have switched to Speed Density and the MAF sensor is no longer needed. Designed in to parts with for ASA and attached with slurry.
Modeled to take Cobb or similar filter.
I struggled a bit with seams, so needed to be sanded out and smoothed with acetone. Having those dialed in would have saved a bit of work for sure. High heat area, so make sure material is choses as such.
Tube printed with outer brim, no need for supports. Plenum needs supports for inner recess only.