1 / 6
Transformation of a Clarke SAM170 Desk Mounted Magnifying LED Lamp into the USS Enterprise — zdjęcie 1
1 / 6

Transformation of a Clarke SAM170 Desk Mounted Magnifying LED Lamp into the USS Enterprise

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I converted a magnifying lamp into the original Enterprise while still being able to use it as a lamp/magnifier.

Ocena
0 / 5
Polubienia
76
Pobrania
150
Wydruki
0
Wyświetlenia
2328
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

One of the most useful tools I have in my workshop is a Clarke SAM170 Desk Mounted Magnifying LED Lamp.

I use it as a desk lamp above my Prusa i3 MK2 printer and also as a magnifying glass when carrying out fiddly operations such as soldering small components. It is also a great light source when taking photographs.

For many years I have thought that the lamp resembles the starship U.S.S. Enterprise from the original series of Star Trek. I decided to 3D print components to add to the lamp to make the resemblance more accurate.

No modification of the lamp is required except for the replacement of four 12mm self-tapping screws with 18mm versions.

The exploded view shows all elements of the model.  Note that there are two types of pins. The ones shown in white have constant diameter along the length while the blue ones are dual diameter.  The latter allow some adjustment of the nacelles.

The red component is the bracket that is attached to the lamp.  The green triangular plate slides into the bracket.

When attaching the bracket to the lamp, gently screw in the replacement four M3 x 18mm screws. DO NOT OVER-TIGHTEN THE SCREWS AS THE BRACKET MAY CRACK. The holes in the bracket are close to the edges so the PLA is thin at these points.

All components should be printed with white PLA except the parabolic dish assembly (copper PLA) and the characters on the saucer section (black PLA).

I look forward to seeing other variations of this idea.

This project is a remix of the excellent USS Enterprise model by  Neophyte on Thingiverse: Starship Enterprise by Neophyte - Thingiverse

Tagi