1 / 7
LiPo battery holder for LC Racing / Tacon / WLtoys
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved battery holder suitable for LiPo batteries for 1:14 scale LC Racing / Tacon / WLtoys / Eachine RC cars.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This holder
- is suitable for LiPo batteries or the original battery
- has more spacing/rounding for the strap to avoid breaking it
- fits up to 2200 mAh batteries (36 mm width)
- keeps one side open for the battery leads
- keeps the battery away from the center drive shaft / cup
- allows using standard battery straps (eg MultiStar Velcro Battery Strap 20*300mm)
- has no sharp edges
Works great on my LC Racing EMB-1, EMB-TGH, EMB-SC
Should also fit the copy brands WLtoys and Eachine
I tried these batteries
Original LC Racing NiMH
- Hobbyking Nano-tech 2200mAh 25-50C LiPo (best fit)
- Hobbyking Zippy Compact 2200mAh 60C LiPo
- Gens Ace 1800mAh 20C
Don't forget to file down or remove the protruding screw/plastic mount. See attached photos.
Let me know if there is anything I could improve
Supports:
No
Resolution:
0.20
Notes:
3 perimeters
use PLA for stiffness