Dyson v6 turbo brush wall mount brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created Dyson V6 Turbobrush bracket set since I havent found 1 designed for our Dyson Ball & v6 Stick vac accessories
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: Updated model & gcode files to reflect a change I made.
The rear wall of the mounts were too easily cracking when screwed in, so made them thicker.
Also, 2 versions of gcode, high quality print & fast print
I designed a set of asymmetrical wall mount brackets to hang the dyson v6 motorhead turbo brush accessory from.
They're a cradle style design. Hope you like & can use them.
Yes I know antiquated v6 parts :)
Included fusion360 .stl & cura lulzbot edition .gcode set for Lulzbot Taz 4 using PLA 2.85 filament.
.zip contains gcode.
I printed in pla, 2 walls/faces, 20% infill, 90% feedrate with skirt.
It should load with ends facing down, bookended as a matched set.
Should fit right off the plate.
1st set made needed tweaking, printed high quality .18 bead, took 2.5 hours, 2nd set at fastest setting, 1.5 hrs.
Designed to be hung using #6 or #8 miter head wood screws, you may need to bore the hole out depending on your screws.