Weighted model display base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hollow base, to be filled with iron filings, sand, etc. to mount and display models, e.g. planes.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
I designed this to mount some model planes via steel rod, like “battle map” sand table figures.
The main issue to solve was that a purely 3D printed base is too light. A weighted base makes the model less likely to tip over in addition to giving it a better, solid “feel”.
So, my solution was to make a two-piece, hollow base, which can be filled with iron filings, sand, or some other heavy medium, and then glued together.
The model includes a 1.7mm hole for the steel rods I was using, but obviously adjust as needed, or fill it in if you want to mount your model directly.