1 / 2
Prusa XL Left and Right Carriage With Gates 20t Idlers 3mm — zdjęcie 1
1 / 2

Prusa XL Left and Right Carriage With Gates 20t Idlers 3mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Proosa why u put belt sid on the smoth side of idler? Especially on a core xy of all machines.

Ocena
0 / 5
Polubienia
12
Pobrania
42
Wydruki
0
Wyświetlenia
828
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Prusa XL carriages that have the Gates 20t 6mm belt 3mm id for prusa for where the belt touches the toothed side of the belts. It should make the belts last a lot longer in theory. I would install this mod with this one as it does require a lot of disassembly anyway. https://www.printables.com/model/683762-prusa-xl-modified-corexy-back-parts

Reuse all of the old parts and put these idlers in its place https://www.filastruder.com/products/gates-2gt-idler?_pos=1&_sid=1d42bf29e&_ss=r&variant=32673878442055 (the 6mm 3mm id for prusa one).

Tagi