1 / 4
Monitor mount for mic, lights or cameras (1/4" UNC) — zdjęcie 1
1 / 4

Monitor mount for mic, lights or cameras (1/4" UNC)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This little mount lets you attach mount any 1/4 UNC device to your desktop monitor, such as mics, lights or cameras.

Ocena
0 / 5
Polubienia
10
Pobrania
79
Wydruki
0
Wyświetlenia
497
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Public Domain

It sits on top of your monitor, and the threaded bolt at the back tightens it against the monitor to stop movement. The ¼" 20 UNC thread can take the equivalent bolt, allowing you to attach ball-heads, lights, webcams, cameras or microphones. 

 

I printed this in Prusament Galaxy Black PLA, pretty much any setting will do. I used "20mm Structural".

 

The threads and bolt might need a little sanding to make them fit nicely. I also stuck a bit of 3M tape at the end of the bolt to give it a bit more staying power, so I didn't need to clamp it so tightly. 

 

The ballheads and lights in the photos can be found on the web, they're just cheap lights and ballheads.

Tagi