1 / 5
Shop Vac CNC dust shoe for 65mm Spindle — zdjęcie 1
1 / 5

Shop Vac CNC dust shoe for 65mm Spindle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust shoe for 65mm CNC ER11 spindle with 35mm inner/41,5mm outer hose. Requiered additional parts: 1x M4x20mm Screw an…

Ocena
0 / 5
Polubienia
15
Pobrania
200
Wydruki
0
Wyświetlenia
1340
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dust shoe for 65mm CNC ER11 spindle with 35mm inner/41,5mm outer hose.

Requiered additional parts:

1x M4x20mm Screw an one M4 nut

8x 8x2mm round magnets

e.g. 70mm Dust shoe brush

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Notes:

6 wall loops for good strength

Post-Printing

Insert dust show brush in the lower part. Glue in the magnets into the holes, so the lower part will stick to the upper part automatically.

Place the M4 nut in the nut locker and insert carefully into the upper part. Place the upper part on the CNC rotuer and screw in the M4 screw and tighten it

Category: Parts

Tagi