1 / 6
Road/gravel bike transport assistant _ Front wheel place holder (100mm and 110mm through axle) — zdjęcie 1
1 / 6

Road/gravel bike transport assistant _ Front wheel place holder (100mm and 110mm through axle)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Roadbike transport assistant for saving space during car transport without damaging your fork legs.

Ocena
3,5 / 5
Polubienia
163
Pobrania
408
Wydruki
2
Wyświetlenia
3011
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Bracket for road- or gravel bike to safe space during bike transport.

Printable without support if layed on the side.

I recomend to drill out the 12mm hole after printing due to schrinkage. 

I printed it with 5% infill and just 2 perimeters on a prusa mini in PLA and it functioned perfectly.

 

Perhaps having 3 perimeters and more infill will remove the need of drilling out the hole afterwards.

 

Tagi