TT02 underbody/fender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to keep debris out of the chassis, useful for driving in the rain. Made for the st165 body.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 737
- Wydruki
- 1
- Wyświetlenia
- 3603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Only included a step file with the designs, so its easier to modify if needed. I know the side panels dont line up perfectly with the fenders, because they were designed separately and I put them together in one file. They should fit reguardless. Sadly I cant find the front mudflaps anywhere, so you can make them or just leave mudflaps out.
Printing:
Most parts are printed without or minimal supports, the bumpers and mudflaps are tpu, the rest is petg.
For assembly, I made the floor panels and fenders slot together, than you can melt the two parts together with a souldering iron. The rest just screws together.