Tumbler Lid Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tumbler lid organizer for various Yeti lids.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 1260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I created this design for a friend to organize their Yeti lids.
The 2 piece design uses a sliding dovetail to connect the wall mounted baseplate to various holders.
The slotted lid holders were printed on their side.
The straw lid holders were printed on the side surface and required support. This orientation was selection to ensure the fitment was the same as the slotted holders.
The mount plates were printed with the counter-bored hole facing up.
The mount plates were installed with #8 drywall anchors but can also be screwed directly into studs.
All models were printed with 15% infill with Inland PLA