1 / 5

Illusion Windturbine 200 / 250

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stuart800

@Stuart800_1278696

Beautiful illusion wind turbine, rotates in opposite directions.

Ocena: 5 / 5
Polubienia: 142
Pobrania: 507
Wydruki: 3
Wyświetlenia: 4417
Oceny: 3

Aktualizacja u źródła: 18 cze 2026

Informacje o modelu

Źródło: Printables
Kategoria: Outdoor & Garden
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (20)Wydruki i komentarze (Wydruki: 3) (Komentarze: 13)Remiksy (2)Kolekcje (144)

Thank you airfish for the beautiful counter-rotating illusion wind turbines. I couldn't find the original pinwheel anywhere anymore...

I enlarged the wind turbines to 200 mm and added hubs for ball bearings 608ZZ (22x8x7). There are 4 different axles, suitable for an 8, 10,12 or 15 mm rod, the reducer allows you to use a 6mm rod. Due to the adhesive discs on the wind turbines, a print bed with at least 210x210 mm is required. With NabeTest you can adjust the bearing seat of the wind turbines with scaling in X and Y. The labyrinth ring is glued to the wind turbine with CA after mounting the bearing.

"Illusion250" wind turbines with a diameter of 250 mm added, assembly remains the same.

Deckel6 - Blossom is from Dynasus - https://www.thingiverse.com/thing:1596049

Are needed:
2x ball bearings 608ZZ for the wind turbines
1x stainless steel threaded rod M8x72
2x stainless steel nut M8
4x stainless steel cylinder screw M3x8
1x rod 6, 8, 10, 12 or 15 mm

Assembly:
Achse on rod
threaded rod M8x72 in Achse
Distanz10
wind turbine with ball bearing and Labyrinth
Distanz2
Nut M8
Deckel
Cylinder screw M3x8

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would also like to recommend my other wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix