Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As for some reason I hate to print with support I designed this chain link. To print a chain work like this: 1) print…
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 283
- Wydruki
- 1
- Wyświetlenia
- 5620
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As for some reason I hate to print with support I designed this chain link.
To print a chain work like this:
1) print some separate chain links
2) again print some chain links but this time upright and at the correct distance from each other
3) when the print 2) is half way put the separate chain links over those being printed now.
=> you have 2 possibilities, do this while your printer is busy at the other side of the bed or have your printer stop for example with the change filament command (if supported: M600)
4) start over with 1) until your chain is long enough.
Print Settings
Printer:
Delta Rocket
Rafts:
No
No
Resolution:
0.2mm
15%
How I Designed This
designed in Sketchup
Category: Other