Front Wheel for Indego M+ 700
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed replacement front wheels for Bosch Indego M+ 700
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The plastic axle of the orignal front wheels on the Bosch Indego M+ 700 has snapped. Not sure exactly when it happened. Instead of buying original spare parts I decided to try and redesign for 3D printing.
This design reuses the original bearings S269 2RS. The current version has a quite tight fit between the wheel and the bearings. This should probably been relaxed in a future version.
I have installed the new wheels on the robot but it still needs to see some actual use. I am sure something can be learned after a couple of weeks of actual mowing the lawn.
NOTE: Not sure if installing these voids warranty. Installing these is at your own risk.