M. C. Escher's Ascending and Descending - HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M. C. Escher's Ascending and Descending made with HueForge.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Paramount 3D White Transmission Distance: 11
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Charcoal Black
At layer #9 (0.8mm) swap to Cement Gray
At layer #13 (1.12mm) swap to Steel Grey
At layer #16 (1.36mm) swap to White for the rest.