1 / 15
ENDER 3 V3 SE Grinding X / Y Belt Fix V1 — zdjęcie 1
1 / 15

ENDER 3 V3 SE Grinding X / Y Belt Fix V1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New 3D printer, new surprises. ---X AXIS----- This piece should prevent any grinding on the X axis belt…

Ocena
4,917 / 5
Polubienia
184
Pobrania
767
Wydruki
13
Wyświetlenia
6730
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

New 3D printer, new surprises.

---X AXIS-----

This piece should prevent any grinding on the X axis belt

!!!!-Recommended to push a little higher the X belt catch on the X gantry, be carefull to not do it too much or the belt might come off-!!!!

Science behind this new piece.

Figured out the only part of this whole assembly that was actually misalignedwas that left wheel. The X stepper motor didn't rub at all. The path of the belt that goes around the motor and through that corner was the problem.

The stock part pushes the wheel too high, with 4.8 mm. My new desing comes with 4.6mm, enough for the wheel to not rub the alluminium extrusion but does not push the wheel too much up.

---Y AXIS--- (Work in progress)

!!!!!-M3 nuts required-!!!!!!

Moved the belt catches on the Y axis, trying different heights, so far working as intended.

-V1: Great clearence for the front stepper. Currently testing (not so great on the rear wheel)

-V2: Added clearence for the rear wheel, not tested yet.

*Bed level recalibration recommended after install

It is still a work in progress, wanted to get this out so you people can help me test this. Thank you all for your time.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 S1

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

4 walls

Filament: Polyterra PLA Black

Category: 3D Printer Parts

Tagi