AR15 Magazine Rack - USGI

There are so many designs out there for mounting and hanging PMags, but nothing really good for USGI magazines.

This mount was designed around OKAY Surefeed 30 round magazines, but should work around most USGI aluminum and steel mags, as long as it has the thick rib around 48mm from the back of the magazine. Also tested with CMMG 22lr magazines. They were not as snug but still worked. Mags are held loosely enough to easily insert and release, but snugly enough to be mounted on a safe's door and not fall out. It is sturdy enough to hold fully-loaded magazines.

there are two designs, with two subtypes.

• "Compact" prints are about 20mm shorter (163 vs 185mm) in length than the standard models. I recommend the compacts unless you really care about ease of grabbing a mag from the mount.
• flat back or standard. The flatbacks were made to be screwed into a wall or something. The Standard design has a ridge on the back to accommodate some adhesive to secure it to the side of a metal safe or cabinet. I recommend and used 3M's Dual Lock 1" Velcro (https://amzn.to/4c8MpQr affiliate link, https://www.amazon.com/3M-Reclosable-Fastener-SJ3560-Clear/dp/B00JHKTDMA/ normal link). The ridge allows the bottom of the holder to sit flush with the wall/safe and not sag while hanging.

The print in my picture is the standard (adhesive) and non-compact version.

Print with tree supports.

Feedback appreciated