#0133 Pooper Scooper for Small to Medium Dogs

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like! 

**********

Sizing and Fitment:

1. For small to medium dogs.
2. Fits standard disposable poop bags.

Features:

1. Makes it easy to clean up after your pooch and save some money on bags too.
2. Scooper Lid - lid with magnetic attach that acts as a scooper as well - to keep your hands away from the smelly bits.
3. Locking Handle snaps on easily to stay in place.
4. Bag Rim that latches onto the Receiver.
5. Easily remove used bags by pressing on the latches and knot-tie the bag for disposal.

Other things you'll need:

1. 4x 8mm diameter x 2.8mm thick neodymium magnets.

Printing Tips:

1. Because this model most likely will end up staying outside the house, use ASA for UV resistance.  PETG is ok too but may not withstand the weather for as long.
2. PLA is not recommended due to poor UV resistance.
3. Brim of 3-4mm is highly recommended for the Receiver, Bag Rim, and Locking Handle parts.
4. 0.2mm layer height, 0.4mm nozzle.

Assembly Tips:

1. Mix some 2-part epoxy for a strong bond to the magnets.
2. Take note of the magnets' pole directions before you glue them down!
3. Insert the open end of bag through the Bag Rim part and fold it over before clipping it onto the Receiver.

**********

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.