3/4" PVC pipe Filament Spool Rack Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheap easy way to store and organize filament. $5-$10 to store 18-20 spools.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 441
- Wydruki
- 6
- Wyświetlenia
- 2050
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CHEAP easy way to store filament. If your walls are framed 16" on center, you can take 1 10' ¾"PVC pipe ($5.50 where I live), cut into 4 30" sections and have enough for 2 racks. Use any handsaw, sharp razor knife, or your tool of choice to cut.
You might need the center support with open holes if you want your rack to be longer, as the pipe may flex too much past 30".
This is a remix that has closed holes so you don't have to glue the pipe/secure it somehow.
Hole size is 28mm or 1.1" and the OD of ¾" PVC is ~1.05" so its a close, but relaxed fit.