Tray for Volkswagen ID.3 Middle Console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On request by the member of the german forum meinid.com and Youtuber "Schraeg"…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 1378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On request by the member of the german forum meinid.com and Youtuber "Schraeg" (https://www.youtube.com/channel/UCHeWtVw_wNCUZkzc5wif2FQ) i designed a tray to place in the middle console of the Volkswagen electric vehicle ID.3.
Print instuctions: You'll need two sliding blocker feet and two Original Volkswagen divider for the ID.3 middle console, or you'll print the second from here: https://www.thingiverse.com/thing:4896415. You'll have to glue the sliding blocker feet to the bottom of the tray. As an addition, you can print the coin inlay upside down. It matches 50 cent- 1- and 2-Euro coins.
IT IS STRONGLY RECOMMENDED, NOT TO PRINT WITH PLA!!!
Inside a car, temperatures can get very high and may cause PLA-prints to melt!!!
Check out my other designs for the ID.3:
Middle Console Divider: https://www.thingiverse.com/thing:4896415
Cup Holder Inlay Template: https://www.thingiverse.com/thing:4895532
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0,2 (if you want to minimize the stairs effect on top of the tray you might want to increase resolution)
Infill:
20%
Filament: Prusament PETG PETG Jet Black
Category: Automotive