1 / 2
Carrera Shark Sunglasses - Temple Tips and Nosepads — zdjęcie 1
1 / 2

Carrera Shark Sunglasses - Temple Tips and Nosepads

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Temple tips and Nosepads for the Carrera Shark sunglasses from late 90s early 2000s.

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Both are printed in TPU (for these prototypes i used Overture High Speed TPU - Translucent Red)

I suggest printing the temple tips horizontally with no supports and and the nosepads facing upwards with supports enabled.

I've tried many layer heights for the nosepads but i suggest 0.15mm.

Lower infills are recommended for improved flexibility, especially for the temple tips.

The nosepads have too many triangles in their mesh so I suggest using the simplify model funcion in your slicer.

Print the pieces individually to avoid stringing.

 

Tagi