Spikey Plant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build your own creeper from Mario with any length vine stalks. Prints using no supports and separated pieces.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
This is my Piranha Creeper inspired model from Mario 3D world.
Just like the game, this creeper can extend/curve around any obstacle of your choosing; as long as you print the vines.
The vines are screw-based, so its very easy to screw in additional pieces or remove. No glue required. The yellow spikes also technically don't require glue as they snap into place. The tongue and teeth for the head should be placed in first, before adding the white lips. The rockwall anchor works if you balance it out. Otherwise you can find another way to anchor the main creeper down. The "vine curve" connects two pieces with the square peg in order to achieve 90* curves.
Add/remove as many vines straight/curves as one wants. Each vine uses 8 yellow spikes.
- Designed for standard 0.4mm Nozzles and 0.2mm layer height.
- This model uses no supports for printing.
- This model has been split for easy single-extruder filament coloring.
- This model requires glue for assembly.