Televue Sol-Searcher Arca Swiss Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Arca Swiss quick release plate to attach a Televue Sol-Searcher solar finder to a Arca Swiss compatible camera mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This plate provides a means to attach a Televue Sol-Searcher to an Arca Swiss compatible quick release head as shown in the photos. This provides a simple means to aim a camera for solar photography (during an eclipse, for example). The bolt holes are sized for the #10-32 hex head cap screws included with the Sol-Searcher. Depending on your printer, you may need to ream the bolt holes with a #10-32 tap.
Print with the top face down using supports for the groove to which the Sol-Searcher attaches.
My prints used PETG but PLA should work as well. Infill should be at least 25% and at least 4 perimiters to retain rigidity.