1 / 4
PTFE Guide for BambuLab
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really stable PTFE tube guide for BambuLab P1 and X1 series printers. Uses custom base (included).
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 291
- Wydruki
- 1
- Wyświetlenia
- 1421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (68)Powiązane
PTFE Tube Guide with a Custom Base
Improved version available: https://makerworld.com/models/1448989
- Main purpose: prevents the tube from hitting the top glass.
- Advantages of this model:
- A lot more stability thanks to reworked base.
- Added grooves hold the tube securely, which prevents it from bending too much or not enough (radius of about 38,125mm).
- Print recommendations:
- Scale to 102% for ABS (to compensate for shrinkage) - or use included .3mf file
- Supports needed (only for the arm) - printing it vertically upside down seems to be the most optimal way.
- Assembly notes:
- Remove supports and sand the seam on the connecting piece.
- Assemble the two pieces together (requires quite a bit of force).
- Push the tube through the guide.
- Connect the tube to the extruder.
- Slide this assembly down to the place of the original base and screw it in.
- Tested with BambuLab ABS, scaled to 102%, supports enabled, overhang cooling set to 100%. Cost: 4,3g (1,72m). Time: 36min59s (without calibration time). Fits perfectly. Assembled using quite a bit of force.