Gear Lego Technic Compatible - 12 Teeth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Lego technics compatible gear with 12 Teeth and pitch diameter of 12mm
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 1423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I was really struggling to understand gear, gear-ratios, rotational direction so I decided to start creating some gears to play with. I was initially going for the Lego route but decided it was far more cost efficient to make them myself.
Per Gear ( I will be creating loads more ) I have a few flavours.
A variant - Hole for circular axel with a flat side. This should allow for easily print axels on the flat side without any supports.
B variant - Pressure fit to contain a 693ZZ ball bearing.
X variant - Hoping this will fit a lego X axel. I was unable to test-fit as I don't have any. Kinda hoping the eye ball methods does the trick but will see
S variant - 4mm hole to be able to use 3mm metric screws to attach gear
I also included the gear measuring tool to easily see what the pitch diameter is as well as the number of teeth; simply placing the gear inside to see if it fits. Saves me going nuts in counting the teeth and forgetting on which tooth I started counting. Also quicker to find a gear from a box containing all different types of gears.