1 / 1
ER11, ER16, ER20, ER25, ER32 collet conical wiper — zdjęcie 1

ER11, ER16, ER20, ER25, ER32 collet conical wiper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Conical wipers to clean your collet holder or milling spindle/router from stuff. Needs selfadhesive felt.

Ocena
5 / 5
Polubienia
15
Pobrania
123
Wydruki
2
Wyświetlenia
733
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

ER11-ER32 wipers for collet holders.

Should print best in the original orientation cone down.

I printed them on a i3 MK3 with structured bed, 0,4mm Nozzle, PETG, 3 perimeters and 25%infill.

For ER11 up to ER20 i suggest using a brim (i used 3mm) and tree supports for lateral stability. The others should be ok without brim and supports if you get proper bed adhesion.

The felt i used was 3mm selfadhesive felt meant for felt pads for furniture. You should be able to find this in any hardware store.

Tagi