Skadis Hanger for Milwuakee Shockwave Case (New Packout Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Hanger for Milwuakee Shockwave Case (New Packout Version)
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 176
- Wydruki
- 2
- Wyświetlenia
- 1092
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Skadis hanger for the new packout version of the Milwaukee Shockwave bit cases. The only hangers I could find online were for the older style that had bigger rectangular cut outs. The newer cases have smaller cutouts that are shaped like a parallelogram. The pictures attached are not the latest revision. I increased the size of the bump at the end of the arms to secure the case a little bit better. If this causes problems let me know and I will change it back and re-upload.
Print in the orientation it will hang and it shouldn't need any supports. You may want to increase the infill if your case has lots of bits and is heavy though.
Uses the Skadis Universal Hook from CSD_Salzburg