NERF Front grip with Sipik SK-68 holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some time ago I made a flashlight holder for my NERF guns ( http://www.thingiverse.com/thing:1156002 ), but I felt i…
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 379
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Some time ago I made a flashlight holder for my NERF guns ( http://www.thingiverse.com/thing:1156002 ), but I felt i liked to hold my Stryfe in front of the mag, and it was kind of awkward with or without the flashlight holder. That's why i made this.
Designed in OnShape: https://cad.onshape.com/documents/877106419f539d625bdd0e6f/w/13a1e1cc17430f1adb0d5fbb/e/a447fddd71da6ab6d8779c6b
Print Settings
Rafts:
No
Supports:
Doesn't Matter
0.2
Notes:
As there is supports with 0.2 mm air gap for easy break off, I strongly recommend using 0.2 mm layer height.
Grip the bottom support below the flashlight holder and break it off.
Take a wide screwdriver and insert it in the bole at the spring tab and break it loose, just don't break it to far.
There is a removable support in the hole, if it's not in the way you can leave it be if you want. If the spring tab won't flex back bend it back and forth a few times to wear down the edges a bit.
Category: Toy & Game Accessories