Stackable Soap Dishes / Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
They are not meant for travelling. Please check other designs which are snug fit, if you need to.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
They are not meant for travelling. Please check other designs which are snug fit, if you need to.
I was a bit annoyed by having several soaps, looking similar in one tray. Especially when you're not alone in a household this can make it confusing. "Which one is the shampoo???" ...
So I designed stackable soap dishes.
This set consists of several pieces and can be used however you like it.
I personally have these combinations:
Bathtub: Drip Tray, Conditioner, Body Soap, Shampoo
Shower: Body Soap, Shampoo, Lid
I've included an unlabeled soap dish as well. So, if you require to add your own text, you can use that one.
The lid is slightly longer on one side. You can use this part to lift it up. (Might be helpful with slippy fingers. :))
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Yes
Infill:
20%
Filament: DasFilament PETG
Notes:
As the print will most likely come in contact with water regularly, I'd advice to (at least) use PETG.
I'd also advice you to use support on the soap dishes. They are not required for the lid and the drip tray if you properly set it on the build plate.