RepRapPro Huxley foot lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Huxley on a table without any risk of it falling off. Put the the lock through the hole in the foot and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Mount your Huxley on a table without any risk of it falling off.
Put the the lock through the hole in the foot and screw it down with M3 screw and nut.
I use it with an IKEA PS 2012 table with wheels (article number:
902.084.49 / 502.084.51). The shelf is turned up side down to get edges that goes up so stuff won't fall off.
The bottom of both the top and the shelve has a big felt pad glued on (to reduce noise i suppose). After drilling through the top i cut and removed a piece of the felt around where i put the screws.
Category: 3D Printer Accessories