Tektronix P850 Probe ground lead sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter sleeve made to create a replacement ground lead for an Obsolete Tektronix P850 probe. Designed to fit the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter sleeve made to create a replacement ground lead for an Obsolete Tektronix P850 probe.
Designed to fit the female socket connector end of a Tektronix part number 196-3113-02 which is being repurposed for the ground lead: cut the donut shape piece off and replace with alligator clip.
Slide this sleeve over the female socket to get a good fit into the P850 probe (see photos).
Print Settings
Printer Brand:
Snapmaker
Printer:
J1
Rafts:
No
Supports:
No
Resolution:
Fine mode, slow
Infill:
Strong
Filament: SunLu PLA + Gray
Notes:
Print with brim, slowly. 0.4mm nozzle or smaller.
Let cool completely before trimming brim.Clean ends with hobby knife.
Category: Electronics