Hard Drive Enclosure for 3.5in HDD and SATA adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3.5" Hard drive enclosure, with space to add a SATA-USB adapter
- Ocena
- 4,5 / 5
- Polubienia
- 23
- Pobrania
- 191
- Wydruki
- 3
- Wyświetlenia
- 1488
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hard disk drive enclosure, with space to add this SATA-USB adapter https://www.amazon.com.au/UGREEN-Adapter-Support-Converter-Drives/dp/B01H1I9X60/ref=mp_s_a_1_5
If you have a different adapter, I've provided a STEP file for all the parts to customise it.
I printed the side rails in TPU (1 perimeter, 10% infill) so they have some some shock absorption.
The front and rear shell are printed in PETG. PLA might work as well, but may soften when the hard drive heats up. Print with the opening upwards, hexagonal holes on the bed to avoid supports.
Warning : Clips on the rear shell to hold the front and back broke off on my print. But with the drive and the TPU rails, it held everything together fine for me.
This may be a problem for some people.
