1 / 3
Auto Mouse Clicker - undetectable by IT monitoring software — zdjęcie 1
1 / 3

Auto Mouse Clicker - undetectable by IT monitoring software

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Automatically clicks your mouse at random intervals

Ocena
5 / 5
Polubienia
24
Wydruki
1
Wyświetlenia
3330
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Commercial Use

UPDATE - 2/16/2026 - added a heavy duty clicker arm for those requiring 12+ hours of clicking per day everyday. This arm should withstand months of 12+hours of clicking every day.  So far, this arm survived 9 months of 12-18 hours of clicking 7 days a week (~ 3200+ hours)

UPDATE - 3/8/2024 - After 600+ hours of auto clicking. The PLA clicking arm develop a micro crack and was unable to make proper clicks. Updated the clicking arm profile and printed in PETG for better clicking performance. TPU clicking tip also increased in size slightly to accommodate the stronger clicking arm.

This is an automatic mouse clicker that can be programmed with your PC/Mac to random intervals. This will keep you screen from going to sleep. This is NOT a high speed clicker, but only to prevent screen saver from kicking in. 

Unlike mouse jiggler dongle or application that is on your workstation. This clicker is not plugged into your workstation, so your IT department's “corporate monitoring” (cough cough spyware)  have no way of detecting it. The included code is set to randomly click between 0.1 - 60 seconds, and can be customized to your requirements. 

Successfully tested on Logitech M310 and M185 or similar style and size mouse. Will not work on MX vertical series or similar style vertical mouse.

Layer = 0.3mm

Nozzle = 0.4mm

Code and all design files are included.

A heat sink can be added more for looks as this clicker runs only slightly warm after 10 hours of clicking. 

If heat sink isn't used, the normal motor cap is used.

The rest button will initialize the auto clicker any time you press it. Shouldn't need it but can be use if necessary.

You wiill need the following items (Note all links below help support my work) 

Main board LINK

Controller and Motor LINK

Heat Sink (Optional) LINK

Heat sink pad (Required if heat sink is used) LINK

Soldering iron, solder, flux, 18ga - 22ga wires about 24 inches

Some patience  :)

 

Tagi