1 / 1
Filament Feeder System for Ender-3 V3 KE — zdjęcie 1

Filament Feeder System for Ender-3 V3 KE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Moved my filament spool off of the top of my printer.

Ocena
5 / 5
Polubienia
293
Pobrania
1485
Wydruki
20
Wyświetlenia
9953
Oceny
16

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

*Update 05/22/2024:

If you would like to use a larger pulley wheel and cover, I have added 2 more files to the list, each with "140mm" in the description. The same mount and axle files, as well as the same bearing, work for both sizes.

*Update 04/2024:

     I added a repaired version of the pulley wheel cover.  Please use the repaired stl file instead of the original one.

These models were inspired by user BRiTL_UK and his models at https://www.crealitycloud.com/model-detail/65bfae7cf512c0a97f354b57

 

This set was designed to enable me to move my filament spool off the top of my Ender-3 V3 KE printer to reduce the wobbling and shaking caused by the weight of the spool and the shaking of the bed.

This is entirely a "snap-together" design. I did use a rubber mallet to finish tapping the wheel onto the bearing so it was flush, but the rest of it is just snap together with finger pressure.

The only extra part needed is a bearing (10x26x8 sealed.) to place in the center of the pulley wheel.   https://www.amazon.com/dp/B08KT6MFRW?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

Tagi