Bahtinov Mask for Celestron NexStar 127SLT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Bahtinov mask designed for Celestron NexStar 127SLT to aid focusing
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 213
- Wydruki
- 3
- Wyświetlenia
- 758
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
This is a Bahtinov mask (Wikipedia) for Celestron NexStar 127SLT which makes it easier to focus the telescope for the clearest image. This is especially important for astrophotography.
The face of this mask was created with this online generator using the following settings to match the telescope:
- Focal Length: 1500mm
- Outer Diameter: 147mm
- Inner Diameter: 40mm
- StemWidth : SlitWidth = 1:1
- Use 3rd order spectrum: Disabled
- Bahtinov Factor: 150
- inW: 2mm (with ID, results in central obstruction diameter of 44mm)
- outW: 10mm (with OD, results in aperture diameter of 127mm)
- Rounding: Disabled
I used FreeCAD to convert the SVG to a model and add a rim around it. It fits loose so it is quick to add and remove. Adding a thin felt strip should make it fit snug, much like the original lens cover.
This is the first time I've used CAD software and created, let alone used, a Bahtinov mask. I'm sure there's room for improvement, but I'm pleased with the result enough to share it. Odds are, if you don't have the NexStar 127SLT, you will want to find or create a different mask specifically for your telescope.
Dimensions:
- Diameter: 151mm outer, 147mm inner
- Height: 15mm total, 13mm inner rim
- Face and rim thickness: 2mm (same as the original lens cover)
Print details:
- Prusa MK4 with 0.4mm nozzle, no enclosure
- IC3D ABS (because it was the only black filament I had)
- 250C nozzle, 110C bed, fan off
- 0.2mm layers (structural preset)
- Input Shaper
- 1h 57m
- 35g, 14.25m