Flanker style flightstick joystick

Flanker style stick for diy hotas. Files for both a left and right handed version are provided.

Three out of five multi switch guards can be changed to allow for switching between movement restrictions without reprinting the grip.

Test hight of the actuator bump on the fliptrigger and adjust if nessesary.

PCBs can be found here:  github.com/NoPlanNomad/FlankerStick_PCB

Current PCBs are designed for Freejoy firmware. New PCBs for custom firmware project will be released when firmware is done.
It's adviced to use the files from git when ordering the PCBs to ensure they are the most up to date.
PCB zip contains full kicad projects, to order the PCBs you need to unzip it and get gerber files of the wanted PCBs

No parts need to be inserted during printing.

Design assume use of 5 Alps RKJXM1015004 and 5 APEM9533 switches.

Use thin wires. It's possible to assemble the stick with 24awg wires but thinner wires make assembly a lot easier.

Updates:
-> pdf v1.1 included spring specs in BOM.
-> pcb fix
-> Added bom for logic pcb's (assumes one of each logic pcb's for either right or left hand).
-> Added pcb wireing diagram with all pcb's (special thanks to inspectordextergm for profiding the diagram).