Radiator hook/hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of hook/hanger designed to fit a popular European radiator model.
- Ocena
- 4,143 / 5
- Polubienia
- 84
- Pobrania
- 443
- Wydruki
- 8
- Wyświetlenia
- 1535
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a hook/hanger model designed to fit a popular European radiator model. It was designed for the INCASE DAYPACK backpack. Of course, the hook/holder will work for other backpacks, bags, or any other items you want to hang. In the pictures, the model is made of PLA; however, remember that if your radiator gets very hot, it may melt PLA. Therefore, I recommend making the holder out of PETG. For certainty, I am attaching two print files - one for PLA and the other for PETG. I am also attaching a photo with exact dimensions so you can check if this model will fit your radiator.
Recommended printing settings:
Filament: PLA/PETG - It depends on how hot the radiator typically gets
Brim: Not recommended
Infill: 15%
Nozzle: 0.4 mm
Prusa Slicer: Basic settings 0.20 mm Speed
Printing time: 45 min