Dyson toy vacuum cleaner replacement flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement flap for the kids toy vacuum cleaner
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 574
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Title should be description enough.
To mount it, unscrew the single screw on the bottom
V1.3 is the improved version where the hinges are a bit sturdier. But this version also broke somhow :-D
UPDATE 2025-04-13:
Added the attachment piece. Fit should be Ok I printed a test-piece but not the one I uploaded. I apprectiate some feedback.
Also I don't know how long it will last, I did not optimize it for printing, I used just the same measurements.
I still forgot some small “teeth” on one side, but I'm not sure if these are really neccessary. I'll change that in another version.
My Print Settings/Instructions Flap
Layer Height: 0.15mm (Mk4 Structural with InputShaper)
Infill: 15% (Modifier in .3mf with 100% at the hinges)
Support: On build plate only
Material recommandation: PETG
My Print Settings/Instructions Attachment piece
Layer Height: 0.15mm (Mk4 Structural with InputShaper)
Infill: 15% (Maybe 100%?)
Support: On build plate only
Material recommandation: PETG