Furniture Saver Joints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforce furniture with durable 3D-printed angle brackets for repair and stability.
- Ocena
- 5 / 5
- Polubienia
- 240
- Pobrania
- 499
- Wydruki
- 2
- Wyświetlenia
- 2203
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Secure wobbly furniture with the 'Side Table Savior' angle brackets. The straight bracket requires up to 6 x 3.5 mm screws, the T-bracket up to 15, and the new L-bracket needs 11 x 3.5 mm screws. Customize the support by choosing which holes to use for a tailored fit.
Build Instructions:
- Print each bracket with high infill for strength.
- Align brackets to the table's corners or legs as needed.
Print Tips:
- Use a high print resolution for screw holes.
- Test fit with screws before full installation.
This kit is a must-have for any furniture emergency kit, ensuring longevity and stability for your furniture pieces.