1 / 3
MMU3 - Selector Front Plate PC4 M10 With Nipple for PTFE Tube — zdjęcie 1
1 / 3

MMU3 - Selector Front Plate PC4 M10 With Nipple for PTFE Tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MMU3 selector front plate PC4 M10 with nipple to hold the PTFE tube in place.

Ocena
5 / 5
Polubienia
13
Pobrania
66
Wydruki
1
Wyświetlenia
420
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

In my MMU3, I was using a selector front plate that uses a PC4 M10 pnematic coupler, because I'm using a 3mm ID PTFE tube that goes into that plate, it was deforming quite easily and was blocking the filament from time to time. I modeled this new plate that has a nipple to hold the PTFE tube in place (as shown in the pictures), this helped immensely and I don't get “filament got stuck” error anymore.

This can also be fitted to the old MMU2/MMU2s models.

Tagi